Progress in the development of an 88-mm bore 10 Tn3Sn dipole magnet

A 10 T, 2-layer cos(&thetas;)-dipole model magnet with an 88 mm clear bore utilizing an advanced powder-in-tube Nb3Sn conductor is being developed for the LHC. A dedicated conductor development program has resulted in a well performing Rutherford cable containing strands that uniquely exhibit both an overall current density of 600 A/mm2 @ 11 T and filaments with a diameter of 20 ¿m. The resistance between crossing strands amounts to 30-70 ¿¿ by insertion of a stainless steel core. After being exposed to a transverse pressure of 200 MPa identical cables show negligible permanent degradation of the critical current. The mechanical support structure is further optimized in order to reduce the peak stress in the mid-plane to below 130 MPa at full excitation and to control the pre-stress build-up during system assembly. Prior to the manufacturing of the final coils a dummy 2-layer pole is wound, heat-treated at 675°C and vacuum resin impregnated. This paper presents the current status of the magnet development program and highlights in particular the successful conductor developmen

A general scaling relation for the critical current density in Nb3Sn

We review the scaling relations for the critical current density (Jc) in Nb3Sn wires and include recent findings on the variation of the upper critical field (Hc2) with temperature (T) and A15 composition. We highlight deficiencies in the Summers/Ekin relations, which are not able to account for the correct Jc(T) dependence. Available Jc(H) results indicate that the magnetic field dependence for all wires can be described with Kramer's flux shear model, if non-linearities in Kramer plots are attributed to A15 inhomogeneities. The strain (eps) dependence is introduced through a temperature and strain dependent Hc2*(T,eps) and Ginzburg- Landau parameter kappa1(T,eps) and a strain dependent critical temperature Tc(eps). This is more consistent than the usual Ekin unification, which uses two separate and different dependencies on Hc2*(T) and Hc2*(eps). Using a correct temperature dependence and accounting for the A15 inhomogeneities leads to a remarkable simple relation for Jc(H,T,eps). Finally, a new relation for s(eps) is proposed, based on the first, second and third strain invariants.Comment: Accepted Topical Review for Superconductor, Science and Technolog

Development of light and highly radiation transparent cryostats for FCC detector magnets:First analyses of insulation materials

For both versions of the Future Circular Collider, the electron-positron FCC ee$^+$, requiring a 2 T/4 m bore solenoid for particles spectrometry, and the hadron-hadron FCC hh, CERN is developing an innovative design for the detector solenoids, to enable their positioning inside the calorimeters directly surrounding the inner tracker. For this to happen, the cryostat design has to be optimized to achieve minimum radiation length. The novel design consists of a sandwich of thin inner and outer metallic shells for vacuum tightness, supported by an insulating material with sufficient mechanical resistance paired with lowest thermal conductivity, like Cryogel, a flexible aerogel structure (density 0.16 g/cm$^3$), or glass spheres (e.g. type K1 manufactured by 3M, with 65 μm diameter and density of 0.125 g/cm$^3$). These materials would allow constructing a 4 m bore, 6 m long cryostat with a 250 mm total thickness, a heat load less than 400 W on the cold mass and 10 kW on the thermal shield. In this paper, design options are discussed and methods for qualifying the materials presented

Optimizing the vertebrate vestibular semicircular canal: could we balance any better?

The fluid-filled semicircular canals (SCCs) of the vestibular system are used by all vertebrates to sense angular rotation. Despite masses spanning seven decades, all mammalian SCCs are nearly the same size. We propose that the SCC represents a sensory organ that evolution has `optimally designed'. Four geometric parameters are used to characterize the SCC, and `building materials' of given physical properties are assumed. Identifying physical and physiological constraints on SCC operation, we find that the most sensitive SCC has dimensions consistent with available data.Comment: 4 pages, 3 figure

Optimization of the Kinematic Chain of the Thumb for a Hand Prosthesis Based on the Kapandji Opposition Test

Ponènica presentada a International Symposium on Computer Methods in Biomechanics and Biomedical Engineering - CMBBE 2019The thumb plays a key role in the performance of the hand for grasp-ing and manipulating objects. In artificial hands the complex thumb’s kinematic chain (TKC) is simplified and its five degrees of freedom are reduced to only one or two with the consequent loss of dexterity of the hand. The Kapandji op-position test (KOT) has been clinically used in pathological human hands for evaluating the thumb opposition and it has also been employed in some previ-ous studies as reference for the design of the TKC in artificial hands, but with-out a clearly stated methodology. Based on this approaches, in this study we present a computational method to optimize the whole TKC (base placement, link lengths and joint orientation angles) of an artificial hand based on its per-formance in the KOT. The cost function defined for the optimization (MPE) is a weighted mean position error when trying to reproduce the KOT postures and can be used also as a metric to quantify thumb opposition in the hand. As a case study, the method was applied to the improvement of the TKC of an artificial hand developed by the authors and the MPE was reduced to near one third of that of the original design, increasing significantly the number of reachable po-sitions in the KOT. The metric proposed based on the KOT can be used directly or in combination with other to improve the kinematic chain of artificial hands

Towards a new generation axion helioscope

We study the feasibility of a new generation axion helioscope, the most ambitious and promising detector of solar axions to date. We show that large improvements in magnetic field volume, x-ray focusing optics and detector backgrounds are possible beyond those achieved in the CERN Axion Solar Telescope (CAST). For hadronic models, a sensitivity to the axion-photon coupling of \gagamma\gtrsim {\rm few} \times 10^{-12} GeV$^{-1}$ is conceivable, 1--1.5 orders of magnitude beyond the CAST sensitivity. If axions also couple to electrons, the Sun produces a larger flux for the same value of the Peccei-Quinn scale, allowing one to probe a broader class of models. Except for the axion dark matter searches, this experiment will be the most sensitive axion search ever, reaching or surpassing the stringent bounds from SN1987A and possibly testing the axion interpretation of anomalous white-dwarf cooling that predicts $m_a$ of a few meV. Beyond axions, this new instrument will probe entirely unexplored ranges of parameters for a large variety of axion-like particles (ALPs) and other novel excitations at the low-energy frontier of elementary particle physics.Comment: 37 pages, 11 figures, accepted for publication in JCA

Ultimate Performance of the ATLAS Superconducting Solenoid

A 2 tesla, 7730 ampere, 39 MJ, 45 mm thin superconducting solenoid with a 2.3 meters warm bore and 5.3 meters length, is installed in the center of the ATLAS detector and successfully commissioned. The solenoid shares its cryostat with one of the detector's calorimeters and provides the magnetic field required for the inner detectors to accurately track collision products from the LHC at CERN. After several years of a stepwise construction and test program, the solenoid integration 100 meters underground in the ATLAS cavern is completed. Following the on-surface acceptance test, the solenoid is now operated with its final cryogenic, powering and control system. A re-validation of all essential operating parameters is completed. The performance and test results of underground operation are reported and compared to those previously measured

Design and development of the ATLAS central solenoid magnet

The ATLAS central solenoid magnet is being constructed to provide a magnetic field of 2 T in the central tracking part of the ATLAS detector. As a key technology for a solenoid coil as thin as possible, a high-strength aluminum stabilized superconductor has been developed, achieving a yield strength of >100 MPa at 4.2 K. This paper describes the status of the design and development of the solenoid magnet. (14 refs)

The International Axion Observatory (IAXO)

The International Axion Observatory (IAXO) is a new generation axion helioscope aiming at a sensitivity to the axion-photon coupling of a few 10$^{12}$ GeV$^{-1}$, i.e. 1 - 1.5 orders of magnitude beyond the one currently achieved by CAST. The project relies on improvements in magnetic field volume together with extensive use of x-ray focusing optics and low background detectors, innovations already successfully tested in CAST. Additional physics cases of IAXO could include the detection of electron-coupled axions invoked to solve the white dwarfs anomaly, relic axions, and a large variety of more generic axion-like particles (ALPs) and other novel excitations at the low-energy frontier of elementary particle physics. This contribution is a summary of our paper [1] to which we refer for further details.Comment: 4 pages, 2 figures. To appear in the proceedings of the 7th Patras Workshop on Axions, WIMPs and WISPs, Mykonos, Greece, 201

Baby MIND: A magnetised spectrometer for the WAGASCI experiment

The WAGASCI experiment being built at the J-PARC neutrino beam line will measure the difference in cross sections from neutrinos interacting with a water and scintillator targets, in order to constrain neutrino cross sections, essential for the T2K neutrino oscillation measurements. A prototype Magnetised Iron Neutrino Detector (MIND), called Baby MIND, is being constructed at CERN to act as a magnetic spectrometer behind the main WAGASCI target to be able to measure the charge and momentum of the outgoing muon from neutrino charged current interactions.Comment: Poster presented at NuPhys2016 (London, 12-14 December 2016). Title + 4 pages, LaTeX, 6 figure